sreport

Section: Slurm Commands (1)
Updated: Slurm Commands
Index

NAME

sreport - Generate reports from the slurm accounting data.

SYNOPSIS

sreport [OPTIONS...] [COMMAND...]

DESCRIPTION

sreport is used to generate reports of job usage and cluster utilization for Slurm jobs saved to the Slurm Database, slurmdbd. Report data comes from hourly, daily, and monthly rollups of accounting data that occur automatically in the background. Data will be pulled from the rollup table with the longest interval that can satisfy the requested report period. For example, a report on the time range "Start=01/01 End=03/01" will be able to pull from the monthly rollup table, while a report with "Start=01/01-03:00 End=03/01" will need to use the hourly rollup table.

OPTIONS

-a, --all_clusters

Use all clusters instead of only the cluster from which the command was executed.

-M, --cluster

The cluster(s) to generate reports for. Default is local cluster, unless the local cluster is currently part of a federation and in that case generate a report for all clusters in the current federation. If the clusters included in a federation vary through time, use this option to identify the clusters to be included in report. Implies --local.

--federation

Generate a report for the federation if a member of one.

-h, --help

Print a help message describing the usage of sreport.

--local

Generate a report for the local cluster, even if part of a federation. Overrides --federation.

-n, --noheader

Don't display header when listing results.

-p, --parsable

Output will be '|' delimited with a '|' at the end.

-P, --parsable2

Output will be '|' delimited without a '|' at the end.

-Q, --quiet

Print no warning or informational messages, only error messages.

-t <time_format>

Specify the output time format. Time format options are case insensitive and may be abbreviated. The default format is Minutes. Supported time format options are listed in the time command section below.

-T, --tres=<tres_names>

Trackable resource (TRES) to report values for. By default CPU resource use is reported (except for reservation reports. All TRES types reserved by a reservation will be shown by default unless overridden with this option). Multiple TRES names may be separated using a comma separated list for all reports except the job reports, which can only support a single TRES name, or "ALL" for all TRES.

The "Reported" Billing TRES is calculated from the largest Billing TRES of each node multiplied by the time frame. For example, if a node is part of multiple partitions and each has a different TRESBillingWeights defined the Billing TRES for the node will be the highest of the partitions. If TRESBillingWeights is not defined on any partition for a node then the Billing TRES will be equal to the number of CPUs on the node.

TRES node usage is no longer reported in percent format or in Cluster Utilization. Please use TRES CPU instead. The main issue with using node is in most configurations multiple jobs are able to run on the same node. This makes TRES node accounting count the same node multiple times in the same period. In exclusive node configurations, CPU accounting returns the same usage node accounting would.

-v, --verbose

Print detailed event logging.

-V , --version

Print version information and exit.

COMMANDS

<keyword> may be omitted from the execute line and sreport will execute in interactive mode. sreport will process commands as entered until explicitly terminated.

exit

Terminate the execution of sreport. Identical to the quit command.

help

Display a description of sreport options and commands.

nonparsable

Return output to normal after parsable or parsable2 has been set.

parsable

Output will be | delimited with an ending '|'.

parsable2

Output will be | delimited without an ending '|'.

quiet

Print no warning or informational messages, only fatal error messages.

quit

Terminate the execution of sreport. Identical to the exit command.

time <time_format>

Specify the output time format. Time format options are case insensitive and may be abbreviated. The default format is Minutes. Supported time format options include:

SecPer: Seconds/Percentage of Total

MinPer: Minutes/Percentage of Total

HourPer: Hours/Percentage of Total

Seconds: Seconds

Minutes: Minutes

Hours: Hours

Percent: Percentage of Total

verbose

Enable detailed event logging.

version

Display the sreport version number.

!!

Repeat the last command executed.

REPORT TYPES

Valid report types are:

cluster <REPORT> <OPTIONS>

job <REPORT> <OPTIONS>

reservation <REPORT> <OPTIONS>

user <REPORT> <OPTIONS>

<REPORT> options for each type include:

cluster: AccountUtilizationByUser, UserUtilizationByAccount, UserUtilizationByWckey, Utilization, WCKeyUtilizationByUser

job: SizesByAccount, SizesByAccountAndWcKey, SizesByWckey

reservation: Utilization

user: TopUsage

NOTE: If OverSubscribe is configured to FORCE or YES in your slurm.conf and the system is not configured to use preemption (PreemptMode=OFF) accounting can easily grow to values greater than the actual utilization. It may be common on such systems to get error messages in the slurmdbd log stating: "We have more allocated time than is possible."

REPORT DESCRIPTION

cluster AccountUtilizationByUser

This report will display account utilization as it appears on the hierarchical tree. Starting with the specified account or the root account by default this report will list the underlying usage with a sum on each level. Use the 'tree' option to span the tree for better visibility.

NOTE: Idle reservation time will be split evenly among accounts/users given access to it. When a reservation is assigned to whole accounts, the time will be counted in the association for the accounts, not the user associations in the accounts. In this case, the usage of a parent account can be larger than the sum of its children.

cluster UserUtilizationByAccount

This report will display users by account in order of utilization without grouping multiple accounts by user into one, but displaying them on separate lines.

cluster UserUtilizationByWCKey

This report will display users by wckey in order of utilization without grouping multiple wckey by user into one, but displaying them on separate lines.

cluster Utilization

This report will display total usage divided amongst Allocated, Down, Planned Down, Idle, and Planned time for selected clusters.

Refer to the later section for descriptions of these fields.

Note: Reservations created with the IGNORE_JOBS flag are not tracked in the Cluster Utilization report due to the fact that allowing any current/active jobs to continue to run in the reservation introduces the possibility for them to be accounted for incorrectly. The jobs in these reservations will be tracked as normal rather than being bundled in the reservation time, as they are with reservations that do not have the IGNORE_JOBS flag.

Note: The default view for the "Cluster Utilization" report includes the following fields: Cluster, Allocated, Down, PlannedDown, Idle, Planned, Reported. You can include additional fields like OverCommitted and TresCount fields with the Format option. The TresName will also be included if using the -T, --tres <tres_names> option.

cluster WCKeyUtilizationByUser

This report will display wckey utilization sorted by WCKey name for each user on each cluster.

job SizesByAccount

This report will display the amount of time used for job ranges specified by the 'grouping=' option. Only a single level in the tree is displayed defaulting to the root dir. If you specify other accounts with the 'account=' option sreport will use those accounts as the root account and you will receive the aggregated totals of each listed account plus their sub accounts.

job SizesByAccountAndWckey

This report is very similar to SizesByAccount with the difference being each account is pair with wckeys so the identifier is account:wckey instead of just account so there will most likely be multiple accounts listed depending on the number of wckeys used.

job SizesByWckey

This report will display the amount of time for each wckey for job ranges specified by the 'grouping=' option.

reservation Utilization

This report will display total usage for reservations on the systems. Note: Time requests on this report will not truncate the time the reservation used, only the reservations that ran at any time during the period requested.

user TopUsage

Displays the top users on a cluster, i.e. users with the highest usage. By default users are sorted by CPUTime, but the -T, --tres option will sort users by the first TRES specified.

Use the group option to group accounts together. The default is to have a different line for each user account combination.

Each report type has various options...

OPTIONS FOR ALL REPORT TYPES

All_Clusters

Use all monitored clusters. Default is local cluster.

Clusters=<OPT>

List of clusters to include in report. Default is local cluster.

End=<OPT>

Period ending for report. Default is 23:59:59 of previous day. Note that while minutes and seconds are recognized, they will be rounded to the nearest hour as reports cannot be generated for a more specific time range. Valid time formats are...

HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

Format=<OPT>

Comma separated list of fields to display in report.

When using the format option for listing various fields you can put a %NUMBER afterwards to specify how many characters should be printed.

e.g. format=name%30 will print 30 characters of field name right justified. A -30 will print 30 characters left justified.

Start=<OPT>

Period start for report. Default is 00:00:00 of previous day. Note that while minutes and seconds are recognized, they will be rounded to the nearest hour as reports cannot be generated for a more specific time range. Valid time formats are...

HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
now[{+|-}count[seconds(default)|minutes|hours|days|weeks]]

OPTIONS SPECIFICALLY FOR CLUSTER REPORTS

Accounts=<OPT>: When used with the UserUtilizationByAccount, or AccountUtilizationByUser, List of accounts to include in report. Default is all.

Tree: When used with the AccountUtilizationByUser report will span the accounts as they are in the hierarchy.

Users=<OPT>: When used with any report other than Utilization, List of users to include in report. Default is all.

Wckeys=<OPT>: When used with the UserUtilizationByWckey or WCKeyUtilizationByUser, List of wckeys to include in report. Default is all.

OPTIONS SPECIFICALLY FOR JOB REPORTS

Accounts=<OPT>: List of accounts to use for the report. Default is all which will show only one line corresponding to the totals of all accounts in the hierarchy. This explanation does not apply when ran with the FlatView or AcctAsParent options.

AcctAsParent: When used with the SizesbyAccount(*) will take specified accounts as parents and the next layer of accounts under those specified will be displayed. Default is root if no specific Accounts are requested. When FlatView is used, this option is ignored.

FlatView: When used with the SizesbyAccount(*) will not group accounts in a hierarchical level, but print each account where jobs ran on a separate line without any hierarchy.

GID=<OPT>: List of group ids to include in report. Default is all.

Grouping=<OPT>: Comma separated list of size groupings. (e.g. 50,100,150 would group job cpu count 1-49, 50-99, 100-149, > 150). grouping=individual will result in a single column for each job size found.

Jobs=<OPT>: List of jobs/steps to include in report. Default is all.

Nodes=<OPT>: Only show jobs that ran on these nodes. Default is all.

Partitions=<OPT>: List of partitions jobs ran on to include in report. Default is all.

PrintJobCount: When used with the Sizes report will print number of jobs ran instead of time used.

Users=<OPT>: List of users jobs to include in report. Default is all.

Wckeys=<OPT>: List of wckeys to use for the report. Default is all. The SizesbyWckey report all users summed together. If you want only certain users specify them with the Users= option.

OPTIONS SPECIFICALLY FOR RESERVATION REPORTS

Names=<OPT>: List of reservations to use for the report. Default is all.

Nodes=<OPT>: Only show reservations that used these nodes. Default is all.

OPTIONS SPECIFICALLY FOR USER REPORTS

Accounts=<OPT>: List of accounts to use for the report. Default is all.

Group: Group all accounts together for each user. Default is a separate entry for each user and account reference.

TopCount=<OPT>: Used in the TopUsage report. Change the number of users displayed. Default is 10.

Users=<OPT>: List of users jobs to include in report. Default is all.

FORMAT OPTIONS FOR EACH REPORT

FORMAT OPTIONS FOR CLUSTER REPORTS

AccountUtilizationByUser: Accounts, Cluster, Login, Proper, TresCount, Used

UserUtilizationByAccount: Accounts, Cluster, Login, Proper, TresCount, Used

UserUtilizationByWckey: Cluster, Login, Proper, TresCount, Used, Wckey

Utilization: Allocated, Cluster, Down, Idle, OverCommitted, PlannedDown, Reported, Planned, TresCount, TresName

WCKeyUtilizationByUser: Cluster, Login, Proper, TresCount, Used, Wckey

FORMAT OPTIONS FOR JOB REPORTS

SizesByAccount: Account, Cluster

SizesByAccountAndWckey: Account, Cluster

SizesByWckey: Wckey, Cluster

FORMAT OPTIONS FOR RESERVATION REPORTS

Utilization: Allocated, Associations, Cluster, End, Flags, Idle, Name, Nodes, ReservationId, Start, TotalTime, TresCount, TresName, TresTime

FORMAT OPTIONS FOR USER REPORTS

TopUsage: Account, Cluster, Login, Proper, Used

All commands and options are case-insensitive.

EXPLANATION OF REPORT FIELDS

Account: Account name

Allocated: Cluster utilization report: Time that nodes were in use with active jobs or an active reservation. This does not include reservations created with the MAINT or IGNORE_JOBS flags.
Reservation reports: Time that nodes were in use with active jobs in this reservation

Associations: Associations allowed in the reservation

Cluster: Cluster name

Down: Cluster utilization report only: Time that nodes were marked as Down or fully Drained, or time that slurmctld was not responding (if TrackSlurmctldDown is set in slurmdbd.conf)

End: Reservation reports only: End time

Energy: Energy use (if tracking energy consumption)

Flags: Reservation reports only: Flags applied to the reservation

Idle: Cluster utilization report: Time that nodes were not Allocated, Down, PlannedDown, or Planned
Reservation reports: Time that nodes were not Allocated

Login: User's login name

Name: Reservation reports only: Reservation name

OverCommitted: Cluster utilization report only: Time of eligible jobs waiting in the queue over the Planned time. This contains any overflow of Planned time that would otherwise exceed the Reported time. It is typically useful to determine whether your system is overloaded and by how much.

Planned: Cluster utilization report only: Time that nodes were not Allocated, Down or PlannedDown with eligible jobs in the queue that were unable to start due to time or size constraints. If Allocated plus Planned time exceeds the Reported time, the excess will be reported as OverCommitted. If this value is not of importance for you then the number can be grouped with idle time.

PlannedDown: Cluster utilization report only: Time that nodes were in use by a reservation created with the MAINT flag but not the IGNORE_JOBS flag. Also, time that nodes were in the FUTURE or POWERED_DOWN state.

Proper Name: User's proper/real name

Reported: Cluster utilization report only: Total time that records are available for. Nodes that were added to or removed from the cluster during the report period will only contribute usage data for the time they were present in the cluster and cause percentage calculations to deviate from 100%.

ReservationId: Reservation reports only: Reservation ID

Start: Reservation reports only: Start time

TotalTime: Reservation reports only: Amount of time the reservation was valid

TresCount: Number of TRES present

TresName: Name of TRES reported

TresTime: Reservation reports only: Total TRES-time in the reservation

Used: Used TRES-minutes

Wckey: Workload Characterization Key

PERFORMANCE

Executing sreport sends a remote procedure call to slurmdbd. If enough calls from sreport or other Slurm client commands that send remote procedure calls to the slurmdbd daemon come in at once, it can result in a degradation of performance of the slurmdbd daemon, possibly resulting in a denial of service.

Do not run sreport or other Slurm client commands that send remote procedure calls to slurmdbd from loops in shell scripts or other programs. Ensure that programs limit calls to sreport to the minimum necessary for the information you are trying to gather.

ENVIRONMENT VARIABLES

Some sreport options may be set via environment variables. These environment variables, along with their corresponding options, are listed below. (Note: Command line options will always override these settings.)


SREPORT_CLUSTER: Same as -M, --cluster

SREPORT_FEDERATION: Same as --federation

SREPORT_LOCAL: Same as --local

SREPORT_TRES: Same as -t, --tres

SLURM_CONF: The location of the Slurm configuration file.

EXAMPLES

Report number of jobs per account according to different job size bins:

$ sreport job sizesbyaccount Start=11:00
--------------------------------------------------------------------------------
Job Sizes 2024-08-19T11:00:00 - 2024-08-19T11:59:59 (3600 secs)
Time reported in Minutes
--------------------------------------------------------------------------------
  Cluster   Account     0-49 CPUs   50-249 CPUs  250-499 CPUs  500-999 CPUs  >= 1000 CPUs % of cluster
--------- --------- ------------- ------------- ------------- ------------- ------------- ------------
minesofm+      root           770             0             0             0             0      100.00%

Report cluster utilization:

$ sreport cluster utilization Start=11:00
--------------------------------------------------------------------------------
Cluster Utilization 2024-08-19T11:00:00 - 2024-08-19T11:59:59
Usage reported in CPU Minutes
--------------------------------------------------------------------------------
  Cluster Allocate     Down  Planned     Idle  Planned Reported
--------- -------- -------- -------- -------- -------- --------
minesofm+      770      120      239     3791      239     4920

Report top usage:

$ sreport user top Start=11:00
--------------------------------------------------------------------------------
Top 10 Users 2024-08-19T11:00:00 - 2024-08-19T11:59:59 (3600 secs)
Usage reported in CPU Minutes
--------------------------------------------------------------------------------
  Cluster     Login     Proper Name         Account     Used   Energy
--------- --------- --------------- --------------- -------- --------
minesofm+   stephen             ,,,            main      538        0
minesofm+   phteven             ,,,            main      145        0
minesofm+   phteven             ,,,       rivendell       45        0
minesofm+   stephen             ,,,       rivendell       41        0

Report jobs by size from specific user and account:

$ sreport job sizesbyaccount All_Clusters users=stephen account=main PrintJobCount Start=11:00
--------------------------------------------------------------------------------
Job Sizes 2024-08-19T11:00:00 - 2024-08-19T11:59:59 (3600 secs)
Units are in number of jobs ran
--------------------------------------------------------------------------------
  Cluster   Account     0-49 CPUs   50-249 CPUs  250-499 CPUs  500-999 CPUs  >= 1000 CPUs % of cluster
--------- --------- ------------- ------------- ------------- ------------- ------------- ------------
minesofm+      main            12             0             0             0             0      100.00%

Report cluster account utilization with the specified fields during the

specified day and by the specified user:

$ sreport cluster AccountUtilizationByUser start=7/10 end=7/11 cluster=minesofmoria user=stephen format=Account,Cluster,TresCount,Login,Proper,Used
--------------------------------------------------------------------------------
Cluster/Account/User Utilization 2024-07-10T00:00:00 - 2024-07-10T23:59:59 (86400 secs)
Usage reported in CPU Minutes
--------------------------------------------------------------------------------
        Account   Cluster TRES Count     Login     Proper Name     Used
--------------- --------- ---------- --------- --------------- --------
           main minesofm+              stephen             ,,,       38
      rivendell minesofm+              stephen             ,,,        1
          arwen minesofm+              stephen             ,,,        1
         elrond minesofm+              stephen             ,,,        1

Report cluster account utilization by user for a specific account during a

1-week period:

$ sreport cluster AccountUtilizationByUser start=7/23 end=7/24 cluster=minesofmoria account=main
--------------------------------------------------------------------------------
Cluster/Account/User Utilization 2024-07-23T00:00:00 - 2024-07-23T23:59:59 (86400 secs)
Usage reported in CPU Minutes
--------------------------------------------------------------------------------
  Cluster         Account     Login     Proper Name     Used   Energy
--------- --------------- --------- --------------- -------- --------
minesofm+            main                                148        0
minesofm+            main   phteven             ,,,        2        0
minesofm+            main   stephen             ,,,      146        0

Report top usage in percent for a specific account:

$ sreport user topusage start=11:00 -t percent account=main
--------------------------------------------------------------------------------
Top 10 Users 2024-08-19T11:00:00 - 2024-08-19T11:59:59 (3600 secs)
Usage reported in Percentage of Total
--------------------------------------------------------------------------------
  Cluster     Login     Proper Name         Account     Used   Energy
--------- --------- --------------- --------------- -------- --------
minesofm+   stephen             ,,,            main   10.94%    0.00%
minesofm+   phteven             ,,,            main    2.95%    0.00%

COPYING

This file is part of Slurm, a resource management program. For details, see <https://slurm.schedmd.com/>.

Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

This document was created by man2html using the manual pages.
Time: 06:10:55 GMT, December 13, 2024